MEZZANINE DECKING FASTENING SYSTEMS

Cornerstone Specialty Wood Products, LLC® provides engineered fastening systems to efficiently install ResinDek panels in your facility. With our mezzanine deck fastening system, you can rest assured that you have the proper equipment to incorporate your ResinDek panels into your facility. Our engineered fasteners are of the highest quality for a safe and secure installation.

TOP SIDE ENGINEERED FASTENERS

ResinDek® engineered fasteners are designed for strength, durability, and easy installation. No countersinking or pre-drilling is required as the wings near the top of the shaft create a counter-bore for screw heads. The number 2 square drive head in conjunction with the drill point easily pierce up to 12-gauge steel decking. The screws are designed to drill through the ResinDek panels and steel decking prior to the threads engaging, thus preventing the panels from lifting.

• Available in collated strips
• Stout # 10 wire gauge screw
• Zinc coating for high humidity environments resists corrosion
• Your choice of gray or beige drill screws
• Can be installed with our upright screw gun

---

Stand-Up Screwdriver for Engineered Fasteners

For conventional top side screw installation, use Cornerstone Specialty Wood Products, LLC stand-up screwdriver and collated engineered drill screws. Not only will the collated screwdriver save you up to 40% in fastening costs, but it will reduce installation fatigue with its ergonomic design.

In addition, the Stand-Up Screwdriver and Collated Engineered Fasteners offer the following advantages:

• More consistent screw depth with greater control and settings
• Easy to assemble
• Easy to load screw strips
• Fast and easy bit tip replacements
• Requires minimal training
• Handy carrying case included
• 1 year warranty from screw gun manufacturer

---

Collated Screws for Corrugated Metal Deck

B-Deck screws work best in roll form beams and structural steel under 3/16" thick. Valleys less than 2- 1/2" wide may not accommodate the screw gun. Contact Cornerstone Specialty Wood Products, LLC® for additional information.

Notes:

• The above Fastening Systems are for ResinDek® LD, MD and HD.
• Additional Fastening Systems are available, please contact Cornerstone Specialty Wood Products, LLC® for more information.

---

INVISI-LOC® UNDERSIDE ENGINEERED FASTENING SYSTEM

Invisi-Loc® provides showcase mezzanine floors with no visible fasteners that are dependable, economical, and easy to install. The Invisi-Loc under deck engineered fastening system mounts fasteners under the warehouse mezzanine floor, hiding unwanted screw holes on top. Plus, when installed with our pre-punched corrugated metal decking, installation time is reduced, and potentially dangerous metal shavings are eliminated.

• 20 Invisi-Loc engineered fasteners are required per 4' x 8' sheet. A pneudraulic installation tool and a standard medium-duty air compressor supplies the required power.
• Corrugated metal decking is pre-punched and B metal deck is fastened to the bar joists like other steel decking using drilling screws or welding.
• All pneudraulic installation tools can be rented or purchased from Cornerstone Specialty Wood Products, LLC.
• When installed according to Cornerstone Specialty Wood Products, LLC specifications the Invisi-Loc® Underside Engineered Fastening System carries a 10-year warranty.